logo

Client Portals

If you are an existing Greenwire customer, please use one of the following links to log in.
Remote Support
Client Ticketing
Client Invoicing

Additional Support

noc@greenwireit.com
(239) 444-5522

How to Run VMWare ESXi on PowerEdge T105

Greenwire Technology Solutions > Uncategorized  > How to Run VMWare ESXi on PowerEdge T105

How to Run VMWare ESXi on PowerEdge T105

edit: PowerEdge T105 is now on HCL.

How to Run VMWare ESXi 4.0 on PowerEdge T105, you ask? Simple Answer. Flash Drive. The process goes thusly.

  • Get your ESXi Image ready to go. You can download it from the VMWare website.
  • Get your trusty 1GB+ Empty Flash Drive and stick it into one of the USB Ports on the Server
  • Next, Burn the ISO to a disk and stick it in your drive.
  • Press F11 at the BIOS to select your Boot device.
  • Boot from the DVD-ROM Drive.
  • When prompted where to install VMWare ESXi choose the Flash Drive that should show up in the list.
  • When prompted to reboot, remove the installation media. On reboot enter the BIOS.
  • Switch the Hard Drive Boot Priority to put the USB drive to the top.
  • Boot VMWare ESXi as normal.

Voilà! You’re ready to rock. The PowerEdge T105 is not on the HCL so you’re unfortunately unable to run it natively because of the onboard SATA controller. You could also find a compatible SATA controller and put the drives on that, but realistically the USB Drive is not that big of a hassel for most small environments. It also means you can boot VMWare even in the event of a HDD Failure. I’ve heard that many people will actually put the flash drive inside the case that so it is not at risk of being knocked around.

user-gravatar
Greenwire Technology Solutions
6 Comments
  • Don DeCosta
    Reply
    Posted at 2:01 pm, June 20, 2009

    Hey! That worked!!!! So Totally Cool! Easiest instructions for this topic on the web!

    I put the 1GB USB inside the case and we’re set.

  • Joe Filla
    Reply
    Posted at 11:55 pm, July 6, 2009
    • Posted at 11:59 pm, July 6, 2009

      Must have just added it. Awesome!

  • Gabriel
    Reply
    Posted at 8:25 am, July 31, 2009

    Thank you Joe Filla and Paul, but: the T105 *is* on the list, indeed, yet I cannot start ESXi after the installation succeeded: it says: Failed to find boot partition, or something like that.

    Did they just added the T105 on the HCL but only restricted to USB-drive mode?

  • Helen
    Reply
    Posted at 10:21 pm, April 3, 2010

    Hey.. just wanted to say thanks…. I think I installed a bazillion times before finding your thread.. worked like a charm.. 🙂

  • Tom
    Reply
    Posted at 11:28 am, May 12, 2010

    I tried to install ESX v4.0.0 on my T105 using a 4GB flash drive but it was insufficient.
    Installation needs at least 9,5GB.
    I haven’t a 10GB flash drive or other usb devices so big.

    Do you know how I can solve?

    Thanks.

Post a Comment

Comment
Name
Email
Website